Tuesday, June 21, 2011

Dell 6224 multiple vlans with vlan 1 routing command

You must change the management vlan to something other than vlan 1 if you want to turn on vlan 1 routing.

-To change mng vlan get in config mode then,
(config)# ip add 192.168.254.1 255.255.255.0
ip address vlan 254

-After that you can give vlan 1 ip address and add the routing command to it.
Posted by at

1 comment:

  1. AbHiNaV GuPtAAugust 9, 2011 at 2:16 PM

    sir,
    i am trying to configure vlan on 2950 switch.
    i created “vlan 10″ at interface 0/1 and “vlan 20″ at interface 0/2
    and made 0/24 trunk port.
    but problem is when i made vlan 10 up, then automatically vlan 20 shuts down and when i made vlan 20 “UP” then vlan 10 goes “DOWN”
    there is no meaning of creating only one vlan.
    please help me out.

    ReplyDelete

Subscribe to: Post Comments (Atom)